International Equipment Company (IEC) HN-SII Benchtop Centrifuge With 816 Rotor

Description

International Equipment Company (IEC) HN-SII Benchtop Centrifuge With 816 Rotor
The item up for sale is
USED
"International Equipment Company (IEC) HN-SII Benchtop Centrifuge With 816 Rotor
"
.
The item is in
Fair
cosmetic and working condition.
Upon inspection of the device,
I noticed heavier scuffs and scratches on all sides of the device.
The paint is chipping in areas and there are multiple spots of rust on the outside of the device.
There is a significant scratch below the RPM meter (see picture #2).
There are heavier amounts of rust in the chamber and on the rotor and vile holders (see pictures #6 and #12).
The original power cord was damaged and has been replaced.
The bottom feet are old and cracking (see pictures #10 and #11).
There is noticeable corrosion on the bottom of the device (see picture #10).
All ports and connectors are in good cosmetic condition.
I was able to power on the device with the attached power cord.
I was able to set the Time/Min dial to ten minutes and then started a cycle while slowly adjusting the Speed dial until the centrifuge was running at max speed.
The Brake switch is tested to be working.
I was able to open and close the chamber door and latch it and unlatch it with no issues.
Product is in working condition.
A rotor and vile holders are included.
No other accessories included.
Warehouse ID: 55287
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
This item has been cleaned and handled in accordance with the manufacturer's instructions.
This item has not been altered in any way that significantly changes the product's performance or safety specifications.
Included in the sale is:
(1) International Equipment Company (IEC) HN-SII Benchtop Centrifuge
(1) IEC Cat No. 816 Rotor
(8) IEC Cat No. 305 Vile Holders
No other accessories included
Condition: Used
See pictures for best detail
*
Product Grading System
*
Excellent
- Looks brand new, no scuffs, no scratches, no dents or dings
Very Good
- Minor scuffs or scratches, no dents or dings
Good
- Normal to heavy scuffing and scratching, a few dents or dings
Fair
- Significant scuffing or scratching, several dents or dings
Poor
- Extreme scuffing or scratching, extreme dents, dings
Score For This Product:
Fair
Tested for Key Functions, R2/Ready for Resale:
Seller affirms that Item has been tested in accordance with internal policies and procedures and packaged in a manner that safeguards reusability and protects it from damage during loading, transit, and unloading. All efforts are made to ensure your satisfaction with the quality of the item including providing accuracy in descriptions.  By purchasing, you the buyer, affirm that item is being sold as noted in the description and defined below and agree that this meets buyer requirements.
The originally intended functions of a unit of equipment or component, will satisfactorily serve the purpose(s) of someone who will reuse the unit. Seller has verified that all key functions of the item are functioning properly. Secondary functions not working properly or missing components are disclosed as follows:
Return Policy:
If you are not satisfied with the unit (s), you may return it for a replacement or full refund within (30) days of the receipt. This return policy does not cover ordinary wear and tear or damage caused by improper use or accidents. To initiate a return, please contact the seller through the original listing link.
Recycling:
Seller desires to ensure that electronic equipment is recycled in compliance with local, state, and federal laws upon reaching the end of its useful life or becoming un-useful for any reason and will accept items back at no charge. Your participation in ensuring proper recycling of the equipment is appreciated.  Please help us responsibly recycle any unused parts or electronics by shipping back to us once the item has reached the end of its useful life.
We appreciate your business and your effort in helping to reduce electronic waste in our landfills.
Shipping:
Your order will ship via FedEx or USPS and tracking numbers will be uploaded via eBay. If you do not receive your tracking number please send us a message and we will get that information for you ASAP. Smaller items can be shipped to PO Box but larger items cannot due to FedEx.
Most orders will ship either the same business day or the next business day.
We will do our utmost to pack and ship your item safely and quickly.
If you have special needs concerning shipping, please let us know prior to purchase.
Purchase Agreement:
***By clicking the 'Accept Offer' button, you understand that you're obligated to purchase the item and that you are agreeing to the seller's price and any additional terms that have been specified.***
ATTENTION: If item(s) have not been paid within 7 days, the invoice will be cancelled and the item(s) can be re-listed at any time.
If you have any questions feel free to ask.