HF fan dipole antenna 160/80/40 meters 5KW 1/2 wave dipole Communications SWL

Description

Fan halfwave dipole antenna:
160/80/40
meters
3-Ft-240/31 cores
Wound with #12awg magnet wire
All stainless steel hardware
Poly-Stealth 13 wire used for the legs
All connections crimped and soldered
Adhesive lined heat shrink covering all connections
The 3 element fan dipole works very well at covering all the bands 160-6 meters, while using a tuner on the non-resonant bands reduce power.
This antenna will be custom made for you.
HF (1.8-30 mHz)   3-cores FT-240 31,  50 ohm input, UHF SO-239.
5KW/SSB
2KW/
CW/RTTY.
Where it is resonant, if using a tuner reduce power as to not saturate the cores.
Poly-Stealth 13  used for the elements ie. legs.
Advantages to
Poly-STEALTH
â„¢
High Strength Aerial Wires
Ideal balance of strength and flexibility
Low-Gloss finish and small size makes wire disappear into the background
Superior abrasion resistance for running through trees
UV & Weather resistant for use on the seacoast or in other harsh environments subjected to acid rain, high wind, or high snow and ice loads.
Simply move the dog bone up or down the Poly-Stealth to your desired frequency.
This antenna can be hung either in a Flat-Top or Inverted V configuration.
Total approximate  length 260'.
Every connection crimped, soldered and adhesive lined heat shrink covered.
Legal Limit ++++++++
Add your 50 Ohm coaxial feed line, suspension rope and go.
NOTE *** A wide range tuner can be used to tune this antenna to 160-6 meters
at a
reduced
input power.